Directory: /gallery/mix1/

One level up

1024x768    Full size		My spare modules
1024x768    Full size		A second time
1024x768    Full size		The back of my first tape drive. It was too heavy for me to lift it up to take a photo of the front. the tape is in really bad condition. A few closeups will give a better impression.
1024x768    Full size		The rusty transformer, some electronics and the tape reel motors.
1024x768    Full size		The rest of a pcb.
1024x768    Full size		The transformer.
1024x768    Full size		A capacitor with some rusty clamps.
1024x768    Full size		One of the two reel motors.
1024x768    Full size		A driver circuit.
1024x768    Full size		Closeup of the same board.
1024x768    Full size		Huh...
1024x768    Full size		A better looking part of the drive.
1024x768    Full size		This is a controller that came with every PDP8/L. Does anybody know what that could be? I have no documentation for it. It had been connected to the I/O bus.
1024x768    Full size		Same device.
1024x768    Full size		The other half of the controller. These modules don't look like original DEC. They have only decimal numers, no M or G or W etc.
1024x768    Full size		The better front panel. This originally belongs to the first garage machine. It think it's in nice condition..
1024x768    Full size		The spare cpu. Core and some core support modules missing. but I think that I can get this machine complete, too.
1024x768    Full size		Another strange thing I cannot identify. It's from one of the cabinets, too.
1024x768    Full size		The ASR33 which came with my PDP8/Ls. It's in lousy condition :-(
1024x768    Full size		Closeup of the keyboard. What's happening with this teletype keys?
1024x768    Full size		You can connect both PDP8s to the ASR. And switch between them. It was a multiprocessor installation :-)
1024x768    Full size		ASR front.
1024x768    Full size		Some of my teleprinters :-)
1024x768    Full size		No comment
1024x768    Full size		Some strange cables.
1024x768    Full size		The ASR33 with cover removed
1024x768    Full size		That's behind the switch on the ASR. Here I have found my missing teletype connector Flip Chip...
1024x768    Full size		The ASR control. On the left you can see the DEC reader relay.
1024x768    Full size		The connector card. Unpacked now.
1024x768    Full size		Someone used his head when soldering the wires not onto the contacts.
1024x768    Full size		First stage of rebuild.
1024x768    Full size		Now it looks like this. Not perfect... but ok.
1024x768    Full size		The whole module.
1024x768    Full size		The relay card.
1024x768    Full size		My Teleprint 390 (A German ASR33 import with light and another case).
1024x768    Full size		I forgot to remove one of the pictures.
1024x768    Full size		The PDP8/L which I am just bringing back to life.
1024x768    Full size		trigger1.jpg
1024x768    Full size		trigger2.jpg
1024x768    Full size		trigger3.jpg